STORAGE HIERARCHY

1. caching

Caching is a well known concept in computer science: when programs continually access the same set of instructions, a massive performance benefit can be realized by storing those instructions in RAM. This prevents the program from having to access the disk thousands or even millions of times during execution by quickly retrieving them from RAM. Caching on the web is similar in that it avoids a roundtrip to the origin web server each time a resource is requested and instead retrieves the file from a local computer's browser cache or a proxy cache closer to the user.

2. coherency and consistency-

STORAGE STRUCTURE

1. main memory

Refers to physical memory that is internal to the computer. The word main is used to distinguish it from external mass storage devices such as disk drives. Another term for main memory is RAM.

2. magnetic disk

A memory device, such as a floppy disk, a hard disk, or a removable cartridge, that is covered with a magnetic coating on which digital information is stored in the form of microscopically small, magnetized needles

• moving head disk mechanism
  

3. magnetic tapes

Magnetic tape is a medium for magnetic recording generally consisting of a thin magnetizable coating on a long and narrow strip of plastic. Nearly all recording tape is of this type, whether used for recording audio or video or for computer data storage. It was originally developed in Germany, based on the concept of magnetic wire recording. Devices that record and playback audio and video using magnetic tape are generally called tape recorders and video tape recorders respectively. A device that stores computer data on magnetic tape can be called a tape drive, a tape unit, or a streamer.


HARDWARE PROTECTION

1. Dual-Mode operation

• Sharing system resources requires operating system to ensuthat an incorrect program cannot cause other programs toexecute incorrectly

• Provide hardware support to differentiate between at least twmodes of operations.

a. User mode – execution done on behalf of a user.

b. Monitor mode (also supervisor mode or system mode) –execution done on behalf of operating system.

......Dual-Mode Operation (Cont.)......

• Mode bit added to computer hardware to indicate the currentmode: monitor (0) or user (1)
  
  

• When an interrupt or fault occurs hardware switches to monitomode

2. input/output protection

All I/O instructions are privileged instructions.• Must ensure that a user program could never gain control ofthe computer in monitor mode (i.e., a user program that, aspart of its execution, stores a new address in the interruptvector).

3. memory protection

Must provide memory protection at least for the interrupt vectorand the interrupt service routines.• In order to have memory protection, add two registers thatdetermine the range of legal addresses a program may access:– base register – holds the smallest legal physical memoryaddress.– limit register – contains the size of the range.• Memory outside the defined range is protected

4. CPU protection-

1. Bootstrap program

answer:
In computing, booting (booting up) is a bootstrapping process that starts operating systems when the user turns on a computer system. A boot sequence is the initial set of operations that the computer performs when power is switched on. The bootloader typically loads the main operating system for the computer.

2. Difference of interrupt and their use

answer:
An interrupt is an event in hardware that triggers the processor to jump from its current program counter to a specific point in the code. Interrupts are designed to be special events whose occurrence cannot be predicted precisely (or at all). The MSP has many different kinds of events that can trigger interrupts, and for each one the processor will send the execution to a unique, specific point in memory. Each interrupt is assigned a word long segment at the upper end of memory. This is enough memory for a jump to the location in memory where the interrupt will actually be handled. Interrupts in general can be divided into two kinds- maskable and non-maskable.

*A maskable interrupt is an interrupt whose trigger event is not always important, so the programmer can decide that the event should not cause the program to jump.

*A non-maskable interrupt (like the reset button) is so important that it should never be ignored. The processor will always jump to this interrupt when it happens. Often, maskable interrupts are turned off by default to simplify the default behavior of the device. Special control registers allow non-maskable and specific non-maskable interrupts to be turned on. Interrupts generally have a "priority;" when two interrupts happen at the same time, the higher priority interrupt will take precedence over the lower priority one. Thus if a peripheral timer goes off at the same time as the reset button is pushed, the processor will ignore the peripheral timer because the reset is more important (higher priority).


3. Monitor mode

answer:
Monitor mode, or RFMON (Radio Frequency Monitor) mode, allows a computer with a wireless network interface card (NIC) to monitor all traffic received from the wireless network. Unlike promiscuous mode, which is also used for packet sniffing, monitor mode allows packets to be captured without having to associate with an access point or ad-hoc network first. Monitor mode only applies to wireless networks, while promiscuous mode can be used on both wired and wireless networks. Monitor mode is one of the six modes that 802.11 wireless cards can operate in: Master (acting as an access point), Managed (client, also known as station), Ad-hoc, Mesh, Repeater, and Monitor mode.

4. user mode

answer:
In Kernel mode, the executing code has complete and unrestricted access to the underlying hardware. It can execute any CPU instruction and reference any memory address. Kernel mode is generally reserved for the lowest-level, most trusted functions of the operating system. Crashes in kernel mode are catastrophic; they will halt the entire PC4. User mode

5. Device status table

answer:

6. Direct memory access

answer:
Direct memory access (DMA) is a feature of modern computers and microprocessors that allows certain hardware subsystems within the computer to access system memory for reading and/or writing independently of the central processing unit. Many hardware systems use DMA including disk drive controllers, graphics cards, network cards and sound cards. DMA is also used for intra-chip data transfer in multi-core processors, especially in multiprocessor system-on-chips, where its processing element is equipped with a local memory (often called scratchpad memory) and DMA is used for transferring data between the local memory and the main memory. Computers that have DMA channels can transfer data to and from devices with much less CPU overhead than computers without a DMA channel. Similarly a processing element inside a multi-core processor can transfer data to and from its local memory without occupying its processor time and allowing computation and data transfer concurrency

7. Differrence of RAM and DRAM

answer:
RAM-RandomRandom accessaccessaccess memory or RAM most commonly refers to computer chips that temporarily store dynamic data to enhance computer performance. By storing frequently used or active files in randomrandomrandom accessaccessaccess memory, the computer can accessaccessaccess the data faster than if it to retrieve it from the far-larger hard drive. RandomRandomRandom accessaccessaccess memory is also used in printers and other devices.
RandomRandomRandom accessaccessaccess memory is volatile memory, meaning it loses its contents once power is cut. This is different from non-volatile memory such as hard disks and flash memory, which do not require a power source to retain data. When a computer shuts down properly, all data located in randomrandomrandom accessaccessaccess memory is committed to permanent storage on the hard drive or flash drive. At the next boot-up, RAM begins to fill with programs automatically loaded at startup, and with files opened by the user.

DRAM-Dynamic random access memory (DRAM) is a type of random access memory that stores each bit of data in a separate capacitor within an integrated circuit. Since real capacitors leak charge, the information eventually fades unless the capacitor charge is refreshed periodically. Because of this refresh requirement, it is a dynamic memory as opposed to SRAM and other static memory.

8. main memory

answer:
Refers to physical memory that is internal to the computer. The word main is used to distinguish it from external mass storage devices such as disk drives. Another term for main memory is RAM.
The computer can manipulate only data that is in main memory. Therefore, every program you execute and every file you access must be copied from a storage device into main memory. The amount of main memory on a computer is crucial because it determines how many programs can be executed at one time and how much data can be readily available to a program.
Because computers often have too little main memory to hold all the data they need, computer engineers invented a technique called swapping, in which portions of data are copied into main memory as they are needed. Swapping occurs when there is no room in memory for needed data. When one portion of data is copied into memory, an equal-sized portion is copied (swapped) out to make room.
Now, most PCs come

9. magnetic disk

answer:
A memory device, such as a floppy disk, a hard disk, or a removable cartridge, that is covered with a magnetic coating on which digital information is stored in the form of microscopically small, magnetized needles

10. Storage hierarchy

answer:
To clarify the ``guarantees'' provided at different settings of the persistence spectrum without binding the application to a specific environment or set of storage devices, MBFS implements the continuum, in part, with a logical storage hierarchy. The hierarchy is defined by N levels:

1.

LM (Local Memory storage): very high-speed volatile storage located on the machine creating the file.

2.

LCM (Loosely Coupled Memory storage): high-speed volatile storage consisting of the idle memory space available across the system.

3.

-N DA (Distributed Archival storage): slower speed stable storage space located across the system.

Logically, decreasing levels of the hierarchy are characterized by stronger persistence, larger storage capacity, and slower access times. The LM level is simply locally addressable memory (whether on or off CPU). The LCM level combines the idle memory of machines throughout the system into a loosely coupled, and constantly changing, storage space. The DA level may actually consist of any number of sub-levels (denoted DA₁, DA₂, ..., DA_n) each of increasing persistence (or capacity) and decreasing performance. LM data will be lost if the current machine crashes or loses power. LCM data has the potential to be lost if one or more machines crash or lose power. DA data is guaranteed to survive power outages and machine crashes. Replication and error correction are provided at the LCM and DA levels to improve the persistence offered by those levels.

Each level of the logical MBFS hierarchy is ultimately implemented by a physical storage device. LM is implemented using standard RAM on the local machine and LCM using the idle memory of workstations throughout the network. The DA sub-levels must be mapped to some organization of the available archival storage devices in the system. The system administrator is expected to define the mapping via a system configuration file. For example, DA-1 might be mapped to the distributed disk system while DA-2 is mapped to the distributed tape system.